Structural bi-component resin is made of two materials:
A- a modified aesthetic compact resin
B- a modified resin with expanded closed cells, with extreme strength and impact resistance.
The compact material of the outer surface feature extreme resistance to U.V. rays, heat, cold, water, humidity and every day use. The expanded closed cell material on the inside has the ability to withstand stress, tension and unavoidable movements during use.

The structural bi-component resin remains undistorted, insuring maximum resistance from both materials.

Bi-component resin is a recyclable material.

Ispra meets and exceeds the standards set forth in ISO 7173, ANSI/BIFMA X5.1-1993 and ANSI/BIFMA X5.4-1997. The product specifically will meet or exceed the 225 lbs. functional load as well as the 300 lbs. proof load requirements of the test.

Each chair has 4 locking buttons for easy stacking. Chairs can stack both ways, head-feet and feet-head

Seat dim.: 15”x16”
Seat height: 17”
Weight: 11 lbs.

Samples are shipped 1 chair per box a box:
18"x42"x3" at 13 pounds

*********
CONTINENTAL USA ONLY
STANDARD 75 CHAIR SHIPPING MODULE (no accessories) is one pallet:
Dim.: 55.5” x 39” x 71” [inches]
Weight: 775 lb.
ESTIMATED CLASS 110

We suggest stacks of 25 Ispra chairs on an optional resin base which can be easily handled with a handtruck or a palletjack.
Stack Dim.: 18” x 35” x 71”h
Four legs can be attached to the base for convenient palletizing.
Four casters may be used to convert the resin base into an easy move around Ispra dolly (casters NOT included.

We suggest water and mild soap to clean up dust and common everyday dirt.

When “hard to clean” marks are found on the WHITE chairs (only on white chairs!), SOFT SCRUB or an equivalent product will work just fine.

Steam cleaning could be performed from time to time and only when really needed. The operating 212°F-230°F temperature range is considered safe.

And....yes, Drake resin folding chairs can be washed in automatic chair washing machines.

ATTENTION before using any kind of cleaner, make sure that it is is not going to affect the materials of the chair. Try the cleaner on a small area and make sure no visible damages appear for at least 5-7 days before using the cleaner consistently.

Buying our products means never having to paint a chair again. Because the colors of our products run all the way through them they will never need painting. The only ordinary maintenance required is cleaning.
Inspect and check the integrity of each chair every time before deploying it, making sure all bolts and parts are firmly tightened but being also extra careful not to over-tight.
If any parts are missing, damaged, or worn, stop using the chair.

This chair is designed for seating one person at a time and for sitting only.
Do not stand on the chair.
Do not use it as a step ladder.

In the event of damages from extremely rough handling or improper use, do not attempt to glue broken parts back together.

**Call us for spare parts**
We'll be there to assist you in the best way we can.